How to Install the SIM Card in a Moto G7 Power, Moto G Power, Moto G Stylus, Moto G Fast, or Moto E

Objective

  • To properly install the SIM card in a Moto G7 Power, Moto G Power, or Moto G Stylus

Environment

  • Moto E
  • Moto G7 Power
  • Moto G Fast
  • Moto G Power
  • Moto G Stylus
  • Nano SIM card

Procedure

  1. Power off the phone
  2. Remove the phone from its case (if applicable)
  3. Set the phone face-up with the charging port facing you
  4. Locate the SIM card slot on the left side of the phone
  5. Insert the SIM tray removal tool into the small hole on the SIM card tray
  6. Push the SIM tray removal tool into the hole until the SIM card tray pops out
  7. Remove the SIM card tray from the phone
  8. Locate the nano SIM card slot on the SIM card tray
    • The nano SIM card slot is the second slot on the SIM card tray
    • The nano SIM card slot is the smaller of the two slots on the SIM card tray
  9. Place your nano SIM card into the nano SIM card slot on the SIM card tray
    • Note: Make sure that the notch on the nano SIM card aligns with the notch on the nano SIM card slot
  10. Re-insert the SIM card tray into the phone
  11. Power on the phone

Moto_G7_Play_and_G7_Power.png

Additional Notes

  • The Moto G7 Power, Moto G Power, Moto G Stylus, Moto G Fast, and Moto E all use the Nano size SIM Card, the smallest portion of the SIM Cards we send out. For more information on SIM Card sizes, see Installing Your SIM Card
______________________________________________________________________________

Article Created From

  • New Phone Launch

Having trouble finding the answer you’re looking for? Ask an Expert Member.
(Our Experts are not staff, but their knowledge of our service and phones is outstanding!)