How to Install the SIM Card in a Moto Edge

Objective

To install the SIM card in a Moto Edge

Environment

  • Moto Edge
  • Nano SIM card

Procedure

  1. Power off the phone
  2. Remove the phone from its case (if applicable)
  3. Set the phone face-up with the charging port facing you
  4. Locate the SIM card slot on the top edge of the phone
  5. Insert the SIM tray removal tool into the small hole on the SIM card tray
  6. Push the SIM tray removal tool into the hole until the SIM card tray pops out
  7. Remove the SIM card tray from the phone
  8. Locate the nano SIM card slot on the SIM card tray
    The nano SIM card slot is the smaller of the two slots on the SIM card tray
  9. Place your nano SIM card into the nano SIM card slot on the SIM card tray
    Note: Make sure that the notch on the nano SIM card aligns with the notch on the nano SIM card slot
  10. Re-insert the SIM card tray into the phone
  11. Power on the phone

Additional Notes

The Moto Edge uses the Nano size SIM Card, the smallest portion of the Republic Wireless three-in-one SIM Card. For more information on SIM Card sizes, see Installing Your SIM Card

______________________________________________________________________________

Article Created From

  • New Phone Launch

Having trouble finding the answer you’re looking for? Ask an Expert Member.
(Our Experts are not staff, but their knowledge of our service and phones is outstanding!)