How to Install the SIM Card in a Moto E4 Plus

Objective

  • Insert a nano SIM card into a Moto E4 Plus

Environment

  • Moto E4 Plus
  • Nano SIM card

Procedure

  1. Power off the phone
  2. Remove the phone from its case (if applicable)
  3. Set the phone face-down with the charging port facing you
  4. Remove the back cover by placing your fingernail in the notch near the bottom corner and lifting the back off
  5. Locate the nano SIM card slot to the left of the camera
    • Note: The SIM card slot is the lower of the two slots on the upper left hand side (under the metal, not over the metal)
  6. Push your nano SIM card into the nano SIM card slot with the gold contacts facing down and the Republic logo upside down
  7. Snap the back cover back onto the phone
  8. Power on the phone

Moto_E4_Plus.png

Additional Notes

  • The Moto E4 uses the Nano size SIM Card, the smallest portion of the SIM Cards we send out. For more information on SIM Card sizes, see Installing Your SIM Card

 


Article Created From

  • 1219203

Having trouble finding the answer you’re looking for? Ask an Expert Member.
(Our Experts are not staff, but their knowledge of our service and phones is outstanding!)